JBC Multi-tool Stations

So easy to use that you don’t need instructions

The work display provides useful information on tool status in real time. You can set up temperature levels, configure maximum and minimum temperature, set Sleep & Hibernation delay and temperature, enable or disable QST, and much more.

Stations are compatible with other JBC tools

Track, update and connect

The USB connector allows you to manage your job remotely from a PC, with the most innovative technology to take your work beyond the station.

More than a Tool Holder

The stations incorporate Sleep & Hibernation Modes, which lower tip temperature when the tool is placed in the Tool Holder. This modes help extend tip life.

Designed for a perfect movement adaptation

Avoid any undesired movement in the tool while soldering and keep cables away from the soldering area.

Rework Stations offer all of the JBC Technology in a modern and minimal design, combining a control unit, tool, stand, and tip cleaner to help you keep your workspace organized and focus on your projects:

• Connectivity
• Cartridge Holder
• Tool Holder
• JBC Technology
• Easy to use
• Ergonomic & Lightweight Tool

DDSE 2-tool Rework station

The DDE control unit manages two tools simultaneously and is fully compatible with 10 different JBC tools.

The station is equipped with a T245 standard handle and a DR560 desoldering handle.

The DDE 2-Control Unit is capable of controlling 2 tools simultaneously and is fully compatible with 10 different JBC tools.

It provides the best finishing quality thanks to JBC’s most efficient soldering system, intelligent sleep and hibernation modes help to extend the life of the tips.

RMSE Complete Rework System

The RMSE Complete Rework System is the fastest and safest solution for soldering and reworking, and it also uses hot air.

RMSE has all the advantages of the Excellence range. It provides the best soldering quality thanks to JBC’s most efficient soldering system, and additional sleep and hibernation modes help extend tip life.

The DDE 2-Tool Control Unit controls up to two tools simultaneously and is fully compatible with 10 different JBC tools.

The MSE electrical desoldering module is required for the complete desoldering process.

The JTSE Hot Air Station controls finishing using temperature profiles and airflow.

RMSE works simultaneously with DR560 desoldering handle, T245 standard handle and JTT hot air kit.

DMPSE 4-tool Rework station

The DME control unit manages up to 4 tools simultaneously and is fully compatible with 10 different JBC tools.

The MSE electrical desoldering module is required for the finishing process.

The station provides the best soldering quality thanks to JBC’s most efficient soldering system, and additional sleep and hibernation modes help extend the life of the tips.
It includes all the advantages of the Excellence range such as station customization, full control of the soldering process and remote operation control.

The DMPSE works simultaneously with the T210 Precision Handle, the T245 Standard Handle, the AM120 Adjustable Micro Tweezers and the DR560 Desoldering Handle.

DDPE Station 2-Tool Precision Rework

DDPE offers fast and precise rework for SMD components and small outline ICs.

This station is ideal for handling small, delicate components, powered by JBC Most Efficient Soldering System. It features Intelligent Heat Management to extend tip life and reduce energy consumption.

Includes:

DDE 2-Tool Control Unit manages up to two tools simultaneously and is fully compatible with 10 different JBC Tools, delivering up to 150 W per tool.

T210 Precision Handle and AM120 Adjustable Micro Tweezers.

T210 works with C210 Cartridge Range and AM120 with C120 Cartridge Range.

DDSE Finishing station – 2 tools

• Total power – 370W
• Maximum power – 150 W per tool
• Adjustable temperature – 90 to 450 ºC / 190 to 840 ºF
• Vacuum – 75% / 570 mmHg / 22.4 inHg
• Flow – 9 SLPM
• Temperature accuracy – ±3%
• Temperature setting – ±50ºC / ±90ºF Menu setting through the station
• Resistance from top to ground <2 ohms
• Peak to ground voltage – <2 mv rms
• USB-A – Update firmware, graphics and profiles
• USB-B – PC communications
• FAE / Robot connector – Connection for remote control or FAE smoke extractor
• ESD Safe – Supports ANSI/ESD S20.20-2021

RMSE Complete finishing station

JTSE Control unit

• Maximum power – 700 W
• Adjustable temperature selectable – 150 to 450 °C / 300 to 840 °F
• Air flow regulation – 5 to 50 SLPM
• Vacuum – 30% / 228 mmHg / 9 inHg
• Profiles – 25 (up to 10 steps each), 1 preset profile
• Type K TC connector – 1 for control and protection
• ESD safe – Supports ANSI / ESD S20.20-2021
• Potential equalization – Optional connection to EPA
• USB-A – Update firmware, graphics and profiles
• USB-B – PC communications
• RJ12 connector – Connection for remote control or FAE smoke extractor
• Pedal connector – Tool control

DDE CONTROL UNIT

• Maximum power – 150 W per tool
  Adjustable temperature – 90 to 450 ºC / 190 to 840 ºF
  Temperature accuracy – ±3%
  ESD Safe – Supports ANSI/ESD S20.20-2021
  Equalization of potential – Optional connection with EPA
  Resistance from top to ground – <2 ohms
  Peak to ground voltage – <2 mv rms
  USB-A – Update firmware, graphics and profiles
  USB-B – PC communications
• FAE / Robot connector – Connection for remote control or FAE smoke extractor

DMPSE Finishing station – 4 tools

• Maximum power – 160W per tool – 23.5 V
• Adjustable temperature – 90 to 450 ºC / 190 to 840 ºF
• Temperature accuracy – ±3%
• ESD safe supporting ANSI/ESD S20.20-2021
• Potential equalization – Optional connection to EPA
• Resistance from top to ground – <2 ohms
• Peak to ground voltage – <2 mV RMS
• USB-A – Update firmware, graphics and profiles, Dino-Lite USB Connection for microscopes
• USB-B – PC communications
• FAE / Robot connector – Connection for remote control or FAE smoke extractor

DDPE Station 2-Tool Precision Rework

• Nominal power – 370W
• Peak power (Tool) – 150W per tool
• Selectable temperature – 90 to 450 ºC / 190 to 840 ºF
• Idle temp. stability (still air) – ±1.5ºC / ±3ºF / Meets and exceeds IPC J-STD-001F
• Temperature accuracy – ±3%
• Temp. adjustment – ±50ºC / ±90ºF Through station menu setting
• Tip-to-ground resistance – <2 ohms
• Tip-to-ground voltage – <2 mV RMS
• USB-A – Firmware update, Graphics and profiles
• USB-B – PC communications
• FAE / Robot connector – Remote control or FAE Fume Extractor connection