PHBE Preheater for printed circuit boards, dimensions 360x280mm
A preheater is necessary to avoid thermal shock on multi-layer printed circuit boards during finishing.
PHBE is a complete solution for finishing medium and large PCBAs, such as those commonly used in laptops or PCB panels. It has a heating surface of 360 x 277 mm and four TC connections.
Highly reliable and unmatched in temperature accuracy and PCBA control so no component is damaged.
It has three operating modes:
Power Mode mode enables operation at a fixed power level with the possibility of using a protective thermocouple.
Temperature mode maintains the PCBA at a selected temperature, using a control thermocouple and, optionally, protection thermocouples.
The profile mode allows control of the PCBA heating rate using a control and protection thermocouple, without exceeding the recommended limit levels in each application. It has 22 customizable profiles.
Up to four thermocouples can be connected in any of the three operating modes.
- Details
- Maximum power - 1800 W
- Adjustable temperature - 50 to 250 ºC
Heating surface:
- 180 x 277 mm – 1 zone
- 360 x 277 mm -2 zones
– Type K TC connector – 4 for control and protection
– Profiles – 22 (up to 16 steps each)
- Setting temperature profiles - 3 profiles (2, 3 or 4 steps)
- Maximum working time - 50 min or unlimited
– ESD Safe – Supports ANSI/ESD S20.20-2021
– USB-A – Update firmware, graphics and profiles
– USB-B – PC communications
- Robot connector - Remote control
- Aux. connector – Connection to the console
– Pedal connector – Pedal connection (P-005) for heater control
VIDEOS
PHBE
PHBE Preheater