RMSE Complete finishing station
The RMSE Complete Rework System is the fastest and safest solution for soldering and reworking, and it also uses hot air.
RMSE has all the advantages of the Excellence range. It provides the best soldering quality thanks to JBC's most efficient soldering system, and additional sleep and hibernation modes help extend tip life.
The DDE 2-Tool Control Unit controls up to two tools simultaneously and is fully compatible with 10 different JBC tools.
The MSE electrical desoldering module is required for the complete desoldering process.
The JTSE Hot Air Station controls finishing using temperature profiles and airflow.
RMSE works simultaneously with DR560 desoldering handle, T245 standard handle and JTT hot air kit.
- Details
JTSE CONTROL UNIT
- Maximum power - 700 W
– Adjustable temperature selectable – 150 to 450 °C / 300 to 840 °F
– Air flow regulation – 5 to 50 SLPM
Vacuum – 30% / 228 mmHg / 9 inHg
– Profiles – 25 (up to 10 steps each), 1 preset profile
– Type K TC connector – 1 for control and protection
– ESD safe – Supports ANSI / ESD S20.20-2021
– Potential equalization – Optional connection to EPA
– USB-A – Update firmware, graphics and profiles
– USB-B – PC communications
– RJ12 connector – Connection for remote control or FAE smoke extractor
- Pedal connector - Tool control
DDE CONTROL UNIT
– Maximum power – 150 W per tool
- Adjustable temperature - 90 to 450 ºC / 190 to 840 ºF
- Temperature accuracy - ±3%
– ESD Safe – Supports ANSI/ESD S20.20-2021
- Equalization of potential - Optional connection with EPA
– Resistance from top to ground – <2 ohms
– Peak to ground voltage – <2 mv rms
– USB-A – Update firmware, graphics and profiles
– USB-B – PC communications
– FAE / Robot connector – Connection for remote control or FAE smoke extractor